Keeping track of timbers in timber frame construction is important. A good organization system is paramount when it comes to both ordering timbers and organizing cut and completed pieces. When you build a timber frame structure labeling of each timber is vital. This process allows you to keep track of […]
Timber Frame Labeling and Numbering Read More »
If you live in a neighborhood that has a homeowner’s association, it’s most likely that you must receive HOA approval for your wood pergola before you can add it to your back yard. When it comes time to get that permission it helps to have a professional drawing or plan
HOA Approval for your Wood Pergola Read More »
When you want to decorate or carve features into your timbers you want to embellish them! Embellishments in timber structures include, but are not limited to, chamfer details, chamfer stops, pendants, radial reliefs, parallel reliefs, date carvings, and more! Typically, you want to do most of these after the frame
Starting off with the standard timber frame joints. Here we have the three main joints you will come across in a timber frame structure. Please note the descriptions we have for these areas as we talk about tenon thickness, mortise depths, peg layout, and many other key elements of craftsman
Standard Timber Frame Joints Read More »
As much as we love open air timber frames and accessory buildings. Lots of times the timber frame needs to be enclosed to create insulated areas. We find that it’s hard to find these types of details so we are proud to present some here. These timber frame enclosure details
Timber Frame Enclosure Details Read More »
Timber frame roof members can include common rafters, principal rafters, purlins, hips, valleys, and jack rafters. This is an extensive category, and we will be adding joint details to this category frequently. Rafters and Purlins Rough Sawn – Rafters – 4x Rafter, Simple Birdsmouth This is the simplest way to
Timber Frame Roof Members Read More »
Timber Frame post connections have many different types of details on their bottoms and tops. They can interface with concrete foundations, piers, and wood decks to name just a few. There are many different types of conditions and special circumstances here that require attention. We have also included post top
Scarfs and Spline joints are two different ways of creating end of beam to end of beam connections. A scarf joint is when (2) beams are joined end to end to create one long beam from two short ones. Scarf joints can be either joined with sloping interfaces or just
Scarfs and Spline Joints Read More »
Brace Joint Details The timber frame knee brace is an integral part of traditional timber frame construction practice. Also referred to as just a brace, its typically oriented at 45 degrees to the post and beam it connects. The brace works to keep the frame from racking and is an
Knee Brace Drawings Read More »
Frame with Irregular Sized Timber Most large timbers that are sawn for framing never make it to a 4-sided planer. Even with an experienced sawyer and a top-notch mill there will be variation in the cross-sectional sizing of the timbers. When the framer begins to build with these irregular timbers,
Building with Rough Sawn Timber Read More »